Install the Smart Storage battery.
5.
Connect the cable.
6.
Install the access panel (on page 22).
7.
Slide the server into the rack.
8.
Connect each power cord to the server.
9.
Connect each power cord to the power source.
10.
Power up the server
11.
HPE Smart Array P440ar Controller option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
("Powering up the
server" on page 21).
Hardware options installation 77