Hpe Smart Storage Battery - HP ProLiant DL360 Gen9 User Manual

Back up all server data.
1.
Power down the server (on page 21).
2.
Do one of the following:
3.
Extend the server from the rack (on page 21).
o
Remove the server from the rack (on page 22).
o
Remove the access panel (on page 22).
4.
Install the low-profile riser cage.
5.

HPE Smart Storage Battery

To install the component:
Power down the server (on page 21).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 21).
o
Remove the server from the rack (on page 22).
o
Remove the access panel (on page 22).
4.
Hardware options installation 76