Table of Contents
Advertisement
Technical Specification
Power Supply
Power Consumption
Max Current Draw
Battery Backup
Alarm Sounder
Alarm Sound Level
Test/Hush Button
Visual indicators
Operational Life
Interconnection
Fixings
Operating & Storage
Temperature
Humidity Range
* Temperature and Humidity conditions are for normal operation
and storage. The Alarms will function outside these ranges as
required by the specific product standards. Extended exposure
to conditions outside these ranges can reduce product life. For
advice on prolonged operation outside these range consult the
manufacturer.
Important Safety Instructions
WARNING: Mains operated Alarms must be installed and
interconnected by a qualified electrician in accordance with
the local Regulations for Electrical Installations. Failure to
install this Alarm correctly may expose the user to shock or
fire hazards and damage the product.
The Alarm is designed to be permanently mounted, using its own
built-in terminal block to connect it to the mains. The mounting
plate can be screwed directly to the ceiling. Alternatively, it can
be screwed to a standard junction box (BS 4662 single gang
accessory box). The Alarm must not be exposed to dripping or
splashing. There are important markings on the underside of the
Alarm.
230V AC, 50Hz
0.25W (standby)
60mA
9V Replaceable Alkaline battery
Piezoelectric Horn
85dB(A) at 3 meters (min)
Checks sensors, electronics,
interconnection and sounder.
If the unit is in alarm when pressed, it
silences the alarm for 10min
Green LED – Power supply
Red LED – Memory, alarm (if coincides
with horn sounding) or fault
10 years
Units can be interconnected via a
hardwired or wireless system (using
optional Ei168RC RF base)
Supplied with Easi-fit anti-tamper
mounting plate with integral terminal
block and wiring cover, includes screws
and wall plugs
-10°C to +40°C*
15% to 95% RH (non-condensing)
4
Advertisement
Table of Contents
