Connections And Terminal Designation - Siemens SITOP PSU100S Operating Instructions Manual

Description, device design, dimension drawing

2.2 Connections and terminal designation

2.2 Connections and terminal designation
The line input terminals
output terminals
Installation (Page 35)).
The operating state of the device can be processed via the signaling contact
and contact rating, see Chapter Status displays and signaling (Page 12)).
Connections and terminal designations
①
②
②
③
Figure 2-2
Figure 2-3
10
①
②
are used to connect to the loads to be supplied (see also Section
Line input L1, N, PE
Output +
Output –
signal 13, 14
Terminal data for 6EP1332-2BA20, 6EP1333-2BA20, 6EP1334-2BA20, 6EP1322-
2BA00, 6EP1323-2BA00
Terminal data for 6EP1336-2BA10
can be used to establish the connection to supply voltage. The
One screw terminal each
2 screw terminals
2 screw terminals
One screw terminal each
Operating Instructions, 02.2013, C98130-A7589-A1-3-7629
③
(function
SITOP PSU100S