GREAT PLANES Factor 30cc Instruction Manual page 23

❏
7. Assemble the throttle clevis.
❏
8. Install the clevis on the throttle servo.
❏
9. Attach the 2-56 × 1" [25mm] threaded rod to the throttle
pushrod. It is easier to remove the pushrod from the throttle
to install the threaded rod.
❏
10. Cut the outer pushrod tube.
❏
11. Roughen the outer pushrod tube with sandpaper.
❏
12. Install the outer pushrod tube.
❏
13. Slide a plywood outer pushrod support onto the outer
pushrod. Do not glue it yet.
❏
14. Reinstall the nylon clevis and connect it to the throttle
servo arm. Adjust the clevis so that the throttle opens and
23