Teo 4104 Installation Instructions Manual page 22

Teo IP Phone 4104 Installation Instructions
To use static addressing for the phone, subnet, and gateway, first select
STATIC from the ADDRESS CONFIG OPTIONS - IPv4 menu.
( MENU → INSTL → IP → UPDATE → CFG → STATIC) (page 44)
Enter the phone's new IP address with the dial pad.
( MENU → INSTL → IP → PHONE → IPv4 → EDIT)
I P v 6
I P v 6
Select LINK to view the local link address.
If a global address has been automatically configured, GLBL1 will be shown in
the menu. Select this option to edit or remove the global address.
Select ADD to add a new global address. The phone can have up to five
global addresses.
Enter the global address with the dial pad.
O t h e r I P A d d r e s s e s
O t h e r I P A d d r e s s e s
After selecting an IP submenu (DNS, UPDATE, SNTP, or SYSLOG), select CFG
to change the IP address configuration method to DHCP4 or STATIC.
Page 22
IP ADDRESSES
UPDATE SNTP SYSLOG
UPDATE=192.168.1.1
EDIT
UPDATE ADDR CONFG=STATIC
DHCP4
IPv4 ADDR=192.168.1.35
DELETE CLEAR PING4
IPv6 ADDRESS(ES)
LINK GLBL1
ADDR=2115:21:3:A:204:8D:
VIEW EDIT
DNS=192.168.1.2
EDIT
DNS ADDR CONFIG=DHCP4
DHCP4
£
MAC
PING4 CFG
STATIC
ADD
REM PING6
PING4 CFG
STATIC
13-280131 Rev. J