Teo 4104 Installation Instructions Manual page 33

Select EDIT to change the settings for the key.
Select NAME.
Enter the caller ID display name with the dial pad, up to 24 characters
maximum. Caller ID name display may not be supported by some SIP servers.
Press the OK key.
Line appearance sharing as described below is for use with Avaya and other
systems that support shared lines. Leave the Shared Line setting disabled when
connected to a Teo UC system. The share setting is not used for multiple
registrations of the same Line ID as the primary line.
Press the Left or Right Arrow key repeatedly until SHARE is shown in
the menu.
The AUTHID (authentication ID) and PSWD (SIP authentication
password) may be required for this line, and the codec, ptime, and
jitter buffer options may need to be changed; consult your system
administrator.
Select SHARE to control sharing of this line with other telephones.
Select ENABLE to enable sharing, or DISABLE to disable sharing.
Press the OK key.
At other telephones that will share this line, set up a key (not line key 1-4)
with the same Line ID, and enable sharing for that key.
13-280131 Rev. J
LINE KEY OPTIONS
ID NAME AUTHID PSWD
LINE KEY OPTIONS
SHARE CODEC
JTR
LINE KEY OPTIONS
ADD REMOVE
NAME=Nick Robinson
DELETE CLEAR abc
SHARED LINE=DISABLED
ENABLE DISABLE
Installation Options
¤
£¤
PTIME JTR
£
LABEL AA
Page 33