Teo 4104 Installation Instructions Manual page 55

P i n g
P i n g
Select PING to verify the path to an IP address.
Select a device to ping.
Or, select OTHER, enter an IP address or server name, and then select PING.
Character entry is explained on page 14.
The display will show the result of the ping test.
Press any key to return to the Ping menu.
When finished, press the OK key to return to the Diagnostic Options menu or
press the MENU key to exit Setup Mode.
13-280131 Rev. J
SELECT DEVICE TO PING
PHONE GATEWY UPDT PROXY
SELECT DEVICE TO PING
SNTP DHCP REGSTR OTHER
OTHER=
DELETE CLEAR PING
PING4 SUCCESSFUL
PRESS ANY KEY TO EXIT
PING4 FAILED
PRESS ANY KEY TO EXIT
Administration Options
¤
¤
Page 55