Teo 4104 Installation Instructions Manual page 46

Teo IP Phone 4104 Installation Instructions
P R G R M ( P r o g r a m
P R G R M ( P r o g r a m
This option updates the phone operating firmware. Phone operating firmware is digitally
signed by Teo to ensure code validity. Modified operating firmware cannot be loaded into
the phone.
Select PROTO to select the update server type: HTTPS, HTTP, TFTP, or NONE.
To update the phone immediately, select START. The phone will restart after
a successful program update.
The phone can be automatically updated from the server at a preset time.
Select AUTO to change automatic update settings.
Enable or disable automatic updating as required.
Enter the update time, in 12-hour format, with the dial pad. A leading "0" is
required for hours 0-9. Select AM/PM as needed.
Press the OK key when finished.
.
Page 46
U p d a t e s )
U p d a t e s )
PROGRAM=TEO
START AUTO
UPDATE PROTOCOL=TEO
TFTP HTTP HTTPS
UPDATE PROTOCOL=TEO
NONE
AUTO CFG TIME=03:00AM
DISABLE
AUTO=ON
PROTO
¤
¤
AM/PM
13-280131 Rev. J