Omron V600-CA1A Operation Manual page 34

Chemical Resistance
Chemicals that Cause Warping, Cracking, Etc.
Affecting ABS
Trichlene, acetone, xylene, toluene, gasoline, creosol,
methylene chloride, phenol, cyclohexane, aqua, regia,
chromic acid, sulfuric acid (90% RT), methyl ethyl ketone,
aniline, nitrobenzene, monochlorobenzene, pyridine, nitric
acid (60% RT), formic acid (80% RT)
Chemicals that May Cause Discoloring, Swelling, Etc.
Affecting ABS
Hydrochloric acid, alcohol, Freon, sodium hydroxide,
hydrogen peroxide, benzine, sulfuric acid (10% RT), nitric
acid (10% RT), phosphoric acid (85% RT), ammonia
solution
Chemicals that Have No Effect
Ammonia, kerosine, mineral oil, developer, Yushiroken
S50, Chemi-Cool Z, Velocity No. 3, Yushiroken EEE-30Y,
petroleum, grease acetate, calcium hydroxide, phosphoric
acid (30% RT), hydrochloric acid (10% RT), potassium
hydroxide
! Caution
32
R/W Heads and Data Carriers are constructed using both ABS resin and epoxy
resin. Referring to the following charts, be sure to use only those chemicals that
have no effect on the ABS or epoxy resins and avoid using those chemicals that
do have an effect.
Applications requiring explosion-proof capability are not possible.
ABS
The test results listed were obtained at room temperature (approximately 23°C).
Some of the chemicals listed as having no effect may cause problems at higher
or lower temperatures.
Affecting Epoxy
Aqua regia, chromic acid, sulfuric acid (90% RT), nitric
acid (60% RT), ammonia solution, acetone, methylene
chloride, phenol, trichlene
Affecting Epoxy
Sulfuric acid (10% RT), nitric acid (10% RT), hydrochloric
acid (30% RT), acetic acid (50% RT), calcium hydroxide,
benzine, creosol, alcohol, cyclohexane, toluene, xylene,
benzine, grease
Epoxy
Ammonia, hydrochloric acid (10% RT), potassium
hydroxide, petroleum, gasoline, Yushiroken S50,
Chemi-Cool Z, Velocity No. 3, Yushiroken EEE-30Y
Section 5