Effect Of Surrounding Metals - Omron V600-CA1A Operation Manual

R/W Head Installation
Caution
!
V600-H11 R/W Head
(1) Front Panel Mounting
2) Rear Panel Mounting

4-1-2 Effect of Surrounding Metals

V600-H07 R/W Head
Note A mounting bracket is provided with the V600-H07. It is not necessary to use this
bracket if a metal mounting plate larger than the 100×100 mm "footprint" of the
R/W Head is used for installation.
V600-H07
Be sure to ground the mounting surface of the R/W Head if it is metal.
Insert the nuts that are included with the R/W Head into the locations marked "A."
Nut
In addition to surface mounting, it is also possible to flush-mount the V600-H07
within a metal casing to protect it from being struck by other objects. To prevent
malfunctioning, allow at least 50 mm between the sides of the R/W Head and the
metal casing, and do not mount the R/W Head below the metal surface. If the
Section
Mounting plate
Mounting bracket
(included with V600-H07)
Two, M4
Coil center
mounting holes
Coil center
4-1
Two, 4.5 dia.
23