Main Status Screen - Wilson Electronics WILSON PRO 1050 User Manual

____________
1050 Main
Status Screen
Upon power up, the 1050 MAIN unit will attempt to begin it's calibration routine, which
lasts approximately 14 seconds during which time one of the following messages will
appear on the screen:
Boot Screen
In-Line Found Screen
No In-Line Screen
8
IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION
BAND SELECT
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
CABLE LOSS
The 1050 In-Line unit has been found
and is communicating with the 1050
Main. Cable loss calibration is in
CABLE LOSS
progress.
The 1050 In-Line unit has been found
CABLE LOSS
and is communicating with the 1050
Main. Cable loss calibration is in
progress.
CABLE LOSS
BAND SELECT
RESET
BAND SELECT
RESET
BAND SELECT
BAND SELECT CABLE LOSS
RESET
BAND SELECT
RESET
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
BAND SELECT
RESET
CABLE LOSS
RESET
BAND SELECT
RESET
WILSON PRO 1050