Wilson Electronics WILSON PRO 1050 User Manual page 11

________
1050 Main Status Screen (cont.)
Failed Calibration Screen
Cable Loss Button
WILSON PRO 1050
BAND SELECT
RESET
CABLE LOSS
BAND SELECT
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
BAND SELECT
CABLE LOSS
RESET
CABLE LOSS
BAND SELECT
RESET
IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION
CABLE LOSS
Failed cable loss calibration. Cable loss
must be between 4dB and 25dB for all
bands. If the cable loss is calculated to
be outside of this range, calibration
will fail.
Once cable calibration has successfully
completed, the band status screens will
appear.
Pressing the Cable Loss Button will
display the cable losses at the upper
bands and lower bands.
BAND SELECT
RESET
CABLE LOSS
BAND SELECT
RESET
CABLE LOSS
9