Configure Your Tg588V V2 Services - Technicolor TG588v v2 Setup And User Manual

2.5 Configure your TG588v v2 services
Step 1: Browse to the TG588v v2 web interface
Proceed as follows:
1 Browse to http://192.168.1.1
connected to your TG588v v2 (either wired or wirelessly).
2 The TG588v v2 web interface appears. By default, you are logged in as guest. This means that some items may be
hidden. To view all items, click Sign In and enter admin as user name and the ACCESS KEY printed on the product label
of your TG588v v2 as password.
Step 2: Check you Internet connection
Under Internet Access, check the status of your Internet connection. If it is not connected, click Internet Access, enter the
Username and Password for your Internet connection and then click Save.
Step 3: Configure your wireless access points
1 Click Wireless. The Wireless page appears.
2 Change the following settings under Access Point:
a In the SSID name box, type the network name that you want to use for this access point (if you do not want to use the
default one).
b In the Security Mode list under Access Point, select the security mode that you want to use for this access point. We
recommend to use WPA+WPA2-PSK.
c In the Wireless Password box, type the wireless key that you want to use for this access point. The key must consist of
8 to 63 alphanumeric characters. For example: MyKey123.
 Do not use WEP or None, since they are not secure.
WPS will be disabled if you select WEP.

3 Click Save.
4 Reconnect your wireless client(s) to the TG588v v2 using the new wireless settings.
DMS3-CTC-25-42 v1.0
(this is the default IP address of your TG588v v2) on a computer or device that is currently
2 Setting up your TG588v v2
16