Ethernet Led - Technicolor TG588v v2 Setup And User Manual

Wireless LED
Colour
Green
Off
For more information about the Wireless button, see
WPS LED
Colour
Green
Orange
Red
For more information about WPS, see

Ethernet LED

Colour
Green
Off
TV LED
Colour
Green
Off
Upgrade LED
Colour
Blue
Off
Do not power off your TG588v v2 or disconnect any cables as long as the Upgrade LED is on. Interrupting the
upgrade procedure may damage your TG588v v2.
DMS3-CTC-25-42 v1.0
State Description
Solid on The wireless interface is enabled, no wireless activity.
Blinking The wireless interface is enabled, wireless activity.
The wireless interface is disabled.
State Description
Solid On Client successfully registered via WPS.
Blinking WPS registration ongoing.
Blinking Error occurred.
"3.1 Connecting your wireless client via WPS" on page
State Description
Solid on At least one active network device is connected to the Ethernet switch.
Blinking At least one Network device is connected to the Ethernet switch and
sending/receiving data.
No active Ethernet devices connected to the Ethernet switch.
State Description
Solid on Your Digital TV service is up.
Blinking Your Digital TV service is up and there is activity.
Your Digital TV service is down.
State Description
Solid on Software upgrade ongoing
No software upgrade ongoing
"Wireless button" on page 8.
1 Getting started
20.
10