Connecting Your Tg588V V2 To Your Service Provider's Network - Technicolor TG588v v2 Setup And User Manual

2.2 Connecting your TG588v v2 to your service provider's
network
Introduction
This section helps you to connect your TG588v v2 to your service provider's network.
Connecting the cables
Proceed as follows:
1 Take the DSL cable. This is the grey cable that is included in your package.
Only use the DSL cable provided in your package. Other DSL cables may not work with the DSL subscription
that you purchased.
2 Plug one end of the cable in the grey DSL port on the back of your TG588v v2.
3 If your delivery:
Does not include a DSL splitter, plug the other end of the DSL cable into your telephone wall socket.

Includes a DSL splitter, plug the other end of the DSL cable into the DSL/Modem port of the DSL splitter. Plug the

(LINE) cable of the DSL splitter into your telephone wall socket.
A splitter/filter is a box that typically has the following connectors:
• A Line input
• A Phone/PSTN output
• A DSL/Modem output (optional)
DMS3-CTC-25-42 v1.0
DSL
2 Setting up your TG588v v2
13