Powering On Your Tg588V V2 - Technicolor TG588v v2 Setup And User Manual

2.3 Powering on your TG588v v2
Only use the power supply unit that is supplied with your TG588v v2. If your current power supply unit is broken,
contact your service provider or reseller.
Procedure
Proceed as follows:
1 Plug the connector of the power supply unit into your TG588v v2 power inlet port (
2 Plug the power supply unit into a nearby power outlet.
3 Press the power button to turn on your TG588v v2.
4 The LED turns on. Wait at least two minutes to allow your TG588v v2 to complete the startup phase.
DMS3-CTC-25-42 v1.0
2 Setting up your TG588v v2
).
14