Section 3: Configuration
This wizard will guide you through a step-by-step process to configure your camera and
connect it to the Internet. Click Next to continue.
Step 1:
Select how the camera will connect to the Internet.
•
If your camera is connected to a router, or you are unsure how your camera will connect to
the Internet, select DHCP.
Select Static IP Client if your Internet Service Provider has provided you with connection
•
settings, or if you wish to set a static address within your home network. Enter the correct
configuration information and click Next to continue.
If you are using PPPoE, select PPPoE and enter your user name and password.
•
Click Next to continue.
D-Link DCS-4625 User Manual
Network Setup Wizard
20