Safety Training Information - Icom iFR5200H Instruction Manual

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electro-
magnetic energy during transmit mode.
This radio is designed for and classi-
fied as "Occupational Use Only," mean-
W ARN ING
ing it must be used only during the
course of employment by individuals
aware of the hazards, and the ways to
minimize such hazards.
This radio is NOT intended for use by
the "General Population" in an uncon-
trolled environment.
• For compliance with FCC and IC RF Exposure Re-
quirements, the transmitter antenna installation shall
comply with the following three conditions:
1. The transmitter antenna gain shall not exceed 0
dBi.
2. IC-FR5200H:
Transmit only when people are at least the rec-
ommended minimum distance of 141 centimeters
away from the properly installed antenna. This
separation distance will ensure that there is suf-
ficient distance from a properly installed external-
ly-mounted antenna to satisfy the RF exposure
requirements in the applicable RF exposure com-
pliance standards.
2. IC-FR6200H:
Transmit only when people are at least the rec-
ommended minimum distance of 122 centimeters
away from the properly installed antenna. This
separation distance will ensure that there is suf-
ficient distance from a properly installed external-
ly-mounted antenna to satisfy the RF exposure
requirements in the applicable RF exposure com-
pliance standards.
iii
To ensure that your exposure to RF
electromagnetic energy is within the
FCC and IC allowable limits for occu-
pational use, always adhere to the fol-
C AU TIO N
lowing guidelines:
• DO NOT operate the radio without a proper antenna
attached, as this may damage the radio and may also
cause you to exceed FCC and IC RF exposure limits.
A proper antenna is the antenna supplied with this
radio by the manufacturer or an antenna specifically
authorized by the manufacturer for use with this ra-
dio.
Electromagnetic Interference/Compatibility
During transmissions, your Icom radio generates RF
energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn off
the radio in areas where signs are posted to do so. DO
NOT operate the transmitter in areas that are sensitive
to electromagnetic radiation such as hospitals, aircraft,
and blasting sites.