Safety Training Information; Fcc Information - Icom FR9020 11 Instruction Manual

Vhf p25 repeater, uhf p25 repeater
Table of Contents

Advertisement

NOTICE:
The AMBE + 2 ™ voice coding Technology
embodied in this product is protected by intellectual
property rights including patent rights, copyrights and
trade secrets of Digital Voice Systems, Inc. This voice
coding Technology is licensed solely for use within this
Communications Equipment. The user of this Technol-
ogies explicitly prohibited from attempting to extract,
remove, decompile, reverse engineer or disassemble
the Object Code, or in any other way convert the Ob-
ject Code into a human readable form. U.S. Patents
Nos #5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166.

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electro-
magnetic energy during transmit mode.
This radio is designed for and classified
as "Occupational Use Only", meaning it
W ARN ING
must be used only during the course of
employment by individuals aware of the hazards,
and the ways to minimize such hazards. This radio
is NOT intended for use by the "General Popula-
tion" in an uncontrolled environment.
This radio has been tested and complies with the FCC
and IC RF exposure limits for "Occupational Use Only".
In addition, your Icom radio complies with the follow-
ing Standards and Guidelines with regard to RF energy
and electromagnetic energy levels and evaluation of
such levels for exposure to humans:
• FCC OET Bulletin 65 Edition 97-01 Supplement C,
Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromag-
netic Fields.
• American National Standards Institute (C95.1-1992),
IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromag-
netic Fields, 3 kHz to 300 GHz.
• American National Standards Institute (C95.3-1992),
IEEE Recommended Practice for the Measurement
of Potentially Hazardous Electromagnetic Fields– RF
and Microwave.

FCC INFORMATION

• FOR CLASS A UNINTENTIONAL RADIATORS
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,
may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
To ensure that your expose to RF elec-
tromagnetic energy is within the FCC
and IC allowable limits for occupation-
al use, always adhere to the following
C AU TIO N
guidelines:
• DO NOT operate the radio without a proper antenna
attached, as this may damaged the radio and may
also cause you to exceed FCC and IC RF exposure
limits. A proper antenna is the antenna supplied with
this radio by the manufacturer or antenna specifi-
cally authorized by the manufacturer for use with this
radio.
• DO NOT transmit for more than 50% of total radio
use time ("50% duty cycle"). Transmitting more than
50% of the time can cause FCC and IC RF expo-sure
compliance requirements to be exceeded.
Electromagnetic Interference/Compatibility
During transmissions, your Icom radio generates RF
energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn
off the radio in areas where signs are posted to do so.
DO NOT operate the transmitter in areas that are sen-
sitive to electromagnetic radiation such as hospitals,
aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which per-
sons are exposed as consequence of their employment
provided those persons are fully aware of the potential
for exposure and can exercise control over their expo-
sure.
Icom, Icom Inc, and the Icom logo are registered trademarks of
Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other coun-
tries.
All other products or brands are registered trademarks or trade-
marks of their respective holders.
ii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-fr9010Ic-fr9020Fr9010 11

Table of Contents