272
4-5. Using the driving support systems
Four-wheel drive system
Use the front-wheel drive control switch to select the following
transfer modes.
H2 (high speed position, two-
1
wheel drive)
Use this for normal driving on dry
- surfaced roads. This position
hard
gives greater economy, quietest
ride and least wear.
H4 (high speed position, four-
2
wheel drive)
Use this for driving only on tracks
that permit the tires slide, like off-
road, icy or snow-covered roads.
This position provides greater trac-
tion than two-wheel drive.
The four-wheel drive indicator
light comes on
L4 (low speed position, four-
3
wheel drive)
Use this for maximum power and traction. Use "L4" for climbing or
descending steep hills, off-road driving, and hard pulling in sand, mud or
deep snow.
The four-wheel drive and low speed four-wheel drive indicator lights
come on
A.D.D. (automatic disconnecting differential) (if equipped)
The A.D.D. can be engaged or disengaged by the shifting operations
described in the following shifting procedures.
∗
∗
: If equipped