Table of Contents
Advertisement
296
4-5. Using the driving support systems
Four-wheel drive system
Use the front-wheel drive control lever or switch to select the fol-
lowing transfer modes:
"2WD" (high speed position, two-wheel drive)
Use this for normal driving on dry hard-surfaced roads. This position gives
greater economy, quietest ride and least wear.
"4H" (high speed position, four-wheel drive)
Use this for driving only on tracks that permit the tires slide, like off-road,
icy or snow-covered roads. This position provides greater traction than
two-wheel drive.
The "4HI" indicator will come on.
"4L" (low speed position, four-wheel drive)
Use this for maximum power and traction. Use "4L" for climbing or
descending steep hills, off-road driving, and hard pulling in sand, mud or
deep snow.
The "4LO" indicator will come on.
Center differential lock switch (→P. 297)
Indicators
SEQUOIA_OM_USA_OM0C011U
Advertisement
Table of Contents
