Toyota 2015 Hilux Owner's Manual page 550

550
9-1. Specifications
1GD-FTV and 2GD-FTV engines (for EURO IV models
Oil capacity
(Drain and refill —
*
2
reference )
With filter
Without filter
*
1
: EURO IV is an emission standard. If it is not clear that your vehicle meets
relevant standards, contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*
2
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use
Toyota approved "Toyota Genuine Motor Oil" or equivalent to sat-
isfy the following grade and viscosity.
Oil grade: API CF-4, CF or ACEA B1
Recommended viscosity (SAE):
SAE 5W-30 is the best choice
for good fuel economy and
good starting in cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 5W-30 engine
oil is recommended.
Oil viscosity (5W-30 is explained here as an example):
• The 5W in 5W-30 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 30 in 5W-30 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
7.5 L (7.9 qt. 6.6 Imp.qt.)
7.0 L (7.4 qt. 6.2 Imp.qt.)
Temperature range anticipated
before next oil change
*
1
)
Preferred