220
4-2. Driving procedures
Manual transmission
Check that the parking brake is set.
1
Check that the shift lever is set in N.
2
Firmly depress the clutch pedal.
3
A message will be displayed on the
multi-information display. If it is not
displayed, the engine cannot be
started.
Press the engine switch.
4
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is completely
started.
Diesel engine only: the
cator turns on. The engine will start
after the indicator light goes out.
The engine can be started from any engine switch mode.
indi-