Toyota 2015 Hilux Owner's Manual page 87

i-Size child
■
(ECE R129) - Compatibility table
If your child restraint system is of "i-Size" category, you can install it
on the positions mentioned by i-U in the table below.
Child restraint system category can be found in the child restraint
system manual.
Double-cab models
i-Size child
restraint systems
Key of letters inserted in the above table:
X: Not suitable for use with i-Size child restraint systems.
i-U: Suitable for i-Size "universal" child restraint systems forward and
rearward facing.
*
: If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint. Otherwise, put
the head restraint in the upper most position.
When securing some types of child restraint systems in rear seat, it
may not be possible to properly use the seat belts in positions next to
the child restraint without interfering with it or affecting seat belt effec-
tiveness. Be sure your seat belt fits snugly across your shoulder and
low on your hips. If it does not, or if it interferes with the child restraint,
move to a different position. Failure to do so may result in death or
serious injury.
● When installing a child restraint in the rear seats, adjust the front
seat so that it does not interfere with the child or child restraint sys-
tem.
restraint systems
Seating position
Front seat
Passenger seat
X
1-2. Child safety
fastened with
Rear seat
Outboard
*
i-U
87
ISOFIX
1
Center
X