Setting the automatic connection confirmation display to on or off
If the "Display setting" is set to on, the portable player connection sta-
tus will be displayed when the engine switch is turned to the "ACC"
position (vehicles without smart entry & start system) or ACCESSORY
mode (vehicles with smart entry & start system).
Select "Display setting" using the "TUNE >" or "< SELECT" button,
1
and press the "SETUP ENTER" button.
Select "ON" or "OFF" using the "SETUP ENTER" button.
2
Initialization
Select "Initialize" using the "TUNE >" or "< SELECT" button, and press
the "SETUP ENTER" button.
● Initializing the sound settings
Select "Sound setting" using the "TUNE >" or "< SELECT" button
and press
For details about sound settings: →P. 362
● Initializing the device information
Select "Car device info" using the "TUNE >" or "< SELECT" button
and press
Automatic connection of a portable device, automatic connection confirma-
tion display and the passkey will be initialized.
● Initializing the all settings
Select "All initialize" using the "TUNE >" or "< SELECT" button and
press
(YES).
■
The number of Bluetooth
®
Up to 5 Bluetooth
®
■
Bluetooth
audio/phone system functions
Certain functions may not be available during driving.
(YES).
(YES).
®
device that can be registered
device can be registered in the system.
5-7. "SETUP" menu
361
5