Toyota 2015 Hilux Owner's Manual page 148

148
3-2. Opening, closing and locking the doors
Setting and canceling the functions
■
To switch between setting and canceling, follow the procedure
below.
Close all the doors and turn the engine switch to IGNITION ON
1
mode (vehicles with smart entry & start system) or the "ON" posi-
tion (vehicles without smart entry & start system). (Perform step
within 20 seconds.)
2
Shift the shift lever to other
2
than P (vehicles with auto-
matic transmission only), and
press and hold the driver's
door lock switch (
) for approximately 5
seconds and then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
Speed linked door locking function
Driver's door linked door unlocking function
When the setting or canceling operation is complete, all the doors are
locked and then unlocked.
or
to the
Function
Driver's door lock
switch position