126
2. Instrument cluster
■
Eco Saving (if equipped)
Displays the fuel consumption comparison, the average fuel consumption
after reset, and the cost of the consumed fuel.
Fuel consumption comparison
1
Displays the set fuel consumption that
is compared with the actual fuel con-
sumption.
Average fuel consumption after reset
2
Displays the average fuel consumption
since the function was reset.
• The function can be reset by pressing
average fuel consumption after reset is displayed
• Use the average fuel consumption as a reference
Savings/fuel cost
3
Displays the possible savings if the fuel consumption comparison is set,
and displays the actual fuel cost if the fuel consumption comparison is not
set.
Use the displayed fuel cost and savings as a reference. Depending on refuel-
ing methods, driving conditions and environmental factors, the displayed fuel
cost may differ from the actual fuel cost, and in some cases, the fuel cost and
savings may not be linked to the Eco Score evaluation.
■
Eco Saving setting (if equipped)
The fuel price and fuel consumption comparison settings can be set in the
settings display. Use the meter control switches to select
is stopped and press
■
Setting display automatic cancelation
In the following situations, setting display in which the settings can be
changed through the meter control switches will automatically be turned off.
●
If a warning message appears while the setting display is displayed
●
When the vehicle begins to move while the setting display is displayed
■
When disconnecting and reconnecting battery terminals
The drive information data and settings will be reset.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
, and select "Eco Saving" and press
more than 1 second when the
while the vehicle
.