Table of Contents
Advertisement
O3350 IG 19496 Book.book Page 26 Wednesday, April 5, 2000 10:30 PM
Omni 3350 Installation Guide
1.
If the cable is not already connected to the check reader,
insert the small modular plug on one end of the cable into
the check reader's modular jack (Figure 17).
2.
Insert the larger RJ45-type connector on the other end of
the cable into the "RS232" serial port on the terminal's
back panel.
Figure 17 CR 600 Check Reader Connection
3.
Turn on power to the terminal, then connect the check
reader to a power source.
Cable Routing
VeriFone recommends the cable routing shown in Figure 18.
Note that the cable guides have two larger openings for the use
with optional device cables, and two smaller openings for use
with telco and telset cables.
26
Omni 3350 Terminal
Omni 3350
RS232 Port
CR 600
CR 600
Serial Port
Advertisement
Table of Contents
