Table of Contents
Advertisement
O3350 IG 19496 Book.book Page 15 Wednesday, April 5, 2000 10:30 PM
When the terminal has power, the display screen lights and the
green LED indicator flashes on and off (if the printer has no
paper), or solid green if paper is loaded.
Step 6: Install a Paper Roll in the Printer
The internal printer uses single-ply, thermal-sensitive paper 58
millimeters (2.25 inches) wide and about 25 meters (82 feet)
long.
Warning: Poor-quality paper may jam the printer. For high-
quality VeriFone paper, refer to the "Accessories and
Documentation" section.
Caution: Store thermal paper in a dry, dark area. Handle
thermal paper carefully: impact, friction, temperature,
humidity, and oil affect the color and storage characteristics of
the paper. Never load a roll of paper with folds, wrinkles, tears,
or holes at the edges or in the printing area. For best results, cut
a straight edge on the paper with scissors before feeding it into
the printer.
Install a Paper Roll
1.
Turn on the terminal. (The green LED indicator will blink
on and off, indicating the printer needs paper.)
2.
Remove the paper roll cover by lifting it up (Figure 7).
Two ridges on the cover's sides show where to grasp it.
Omni 3350 Installation Guide
15
Advertisement
Table of Contents
