Table of Contents
Advertisement
1-1. Installation
1-1-1. Installation Environment
Operating temperature: 5 dC to 40 dC
_20 dC to +60 dC
Storage temperature:
Operating humidity:
10 % to 90 % relative humidity
Mass:
13 kg
Installation precautions:
Avoid using or storing this system in any of the following
locations;
. Locations subjected to many hours of direct sunlight or
strong light.
. Locations close to heat sources.
. Locations subjected to severe vibrations damp and dusty
. Locations subjected to electricity noise.
. Locations subjected to strong electric or magnetic fields.
. Locations subjected to electrostatic noise.
Ventilation
The inside of the DFR-E3000 is cooled by air circulation
by a fan (rear panel side).
The power supply can be damaged if the exhaust vent (rear
panel) and air intake (front panel) are blocked or the fan is
stopped.
The rear side of the DFR-E3000 should be at least 20 cm
(8 inches) away from walls for ventilation and
maintenance.
1-1-2. Power Supply
1. Power Specifications
A switching regulator is used for the power supply of the
DFR-E3000. The voltage within the range of 100 V to 240
V can be used without changing the supply voltage.
Power requirements: AC 100 to 240 V
50/60 Hz
Power consumption: 200 VA
Peak inrush current:
(1) Power ON, current probe method: 25 A (240 V), 10 A
(100 V)
(2) Hot switching inrush current, measured in accordance
with European standard EN55103-1: 7 A (230 V)
DFR-E3000
Section 1
Service Overview
2. Recommended Power Cord
Required Parts for the U.S.A. and Canada
1 Power Cord (Not supplied with DFR-E3000, Sony Part
No. !1-557-377-11
2 Plug Holder (Black) (Not supplied with DFR-E3000,
Sony Parts No. 2-990-242-01)
Required Parts for Europe
1 Power Cord (Not supplied with DFR-E3000, Sony Part
No. !1-590-910-11
2 Plug Holder (Gray) (Not supplied with DFR-E3000,
Sony Part No. 3-170-078-01.)
2
1
2
1
Live (Brown)
Safety earth
(Green/Yellow)
Neutral (Blue)
1-1
Advertisement
Table of Contents
