Contents - Sony DFR-E3000 Maintenance Manual

Contents

4
This manual is organized by following sections.
Section 1 Service Overview
Explains the fundamental information required for the service of this unit (location
of main parts, removal of cabinet, replacement of the main parts and fixture/
measuring equipment information).
Section 2 Electrical Alignment
Explains the electrical alignment required when replacing the boards and electrical
parts.
Section 3 Spare Parts
This section describes spare parts (exploded views and mechanical parts list, and
electrical parts list).
Section 4 Semiconductor Pin Assignments
Provides function block diagrams and pin names of the semiconductors used in this
unit.
Section 5 Block Diagrams and Description
Provides overall block diagrams and circuit description.
Section 6 Board Layouts
Provides board layouts of the boards used in this unit.
Section 7 Schematic Diagrams
Provides schematic diagrams and frame diagrams of this unit.
n
SDDS is a registered trademark of Sony Corporation.
Westrex is a registered trademark of Westrex.
ADVANTEST is a registered trademark of ADVANTEST CORPORATION.
IBM PC/AT is a registered trademark of International Business Machines
Corporation.
Microsoft, Windows and MS-DOS are either registered trademarks of Microsoft
Corporation.
PIC is registered trademark of Microchip Technology Inc. in the USA and other
countries.
Unless otherwise specified, all name of companies and products are trademarks of
registered trademarks of the respective companies.
DFR-E3000