Marking Imarki; Marking Imark] - JRC JMA-993-SA Instruction Manual

a o a a a a a a a a a a a a a a a a a a a a a a a a a a o a a a o o o a a o a
^/
R)
\)
Marking IMARK]
A maximum of 20 marks can be displayed at arbitrary positions on the radar video.
A mark created on the display holds the latitude and longitude.
tll
Plotting Marks.
cuRsoR(
Place the cursor over the upper right section of the screen
(right figure), then right-click. Next, select "MARK".
lli ,Sfiitl] will appear in the CURSOR ( ) at the upper left of the radar display.
Put the cross cursor mark [ + | on the position where the ltr]
mark is inserted.
Press trackball section left button.
The cross cursor mark [ + ] will be changed into the [o] mark and fixed on the
radar display. When entering more [ol marks, repeat the procedures from step
2. Up to 20 marks can be entered.
Note: lf more than 20 marks are created, the oldest mark is cleared and the newly
created mark is disPlayed.
IIU
Clearing Marks
cuRsoR(
Place the cursor over the upper right section of the screen
(right figure), then right-click. Next, select "MARK'.
jfrffi-Kl, is displayed on CURSOR ( ) at the upper right of the radar display.
Put the cross cursor mark [ + ] on the position where the ltr|
mark is inserted.
Press trackball section right button.
The [o] mark will disappear. When clearing another [n] mark, repeat the
procedure from step 2.
o
O
^/
R)
3-58