JRC JMA-993-SA Instruction Manual page 156

a a a a a a a a a a o a a a a a a a a o a a a a a a o o a l o o a a a a a o a
[V] Setup and Display of Geodetic System
In making up any navigational information, it is necessary to set up the geodetic
system used by the connected navigation equipment. When any saved
navigalional information is loaded, the geodetic system used when the
navigational information was saved will also be displayed. Then, check that the
geodetic system on display is the same as that for the connected navigation
equipment. lf both geodetic systems are different, the positions of the
navigalional information on radar display may be deviated. Therefore, it is
important to set the same geodetic system as the navigation equipment.
Gtick MENO.
The Main Menu will appear.
Glick
81 MEN
The Subl Menu will appear.
Glick
V/MAP INF
The NAV/MAP INFO Menu will appear.
4 Grick lCEopErTd
FEeooertd will be selected.
5 Select by pressjngffi ,n the menu.
This is set by ;l o-r the numeric
input dialogue-Eox.
Select the number of geodetic
system.
(See Table of Geodetic Systems)
When the number of geodetic system is
entered, its name is changed.
clicklExTi.
The Subl Menu will reappear.
ctick lEFli.
The Subl Menu will be closed.
SUB1 MENU
NAV/MAP INFO
NA
Geodeiic syslem name display
area: The display changes
according to the geodetic
system No. in the right input
atea.
3-86