JRC JMA-993-SA Instruction Manual page 344

o a a a o o o o a a a
a o a a a a o a o a a a a a a a o o o o a a a a a
a o a
1-5 AIS Tarqet Deactivation
When an AIS target is deactivated, the vector and the heading are deleted as a sleepingx2 target.
(Method-1 : With the software button on lhe screen)
1. put the arrow cursor on the lDAetr button and click the track ball section left
button.
Gursor mode'AlS DEACfl is displayed at the upper right side on the screen.
2. Put the cross cursor "+" on the target to be deactivated and press the track ball
section left button .
The selected AIS target is deactivated.
(Method-2 : With the menu operation)
1. Left-click IMENUI on the screen.
Main menu opens.
2. Left-click
3. Left-click
4. Left-click
5. Left-click "ON" of "3.AlS DEACTIVATE .
Cursor mode "AlS DEACT" is displayed at the upper right side on the
screen.
6. Put the cross cursor "+" on the target to be deactivated and press the track ball section
left button . The selected AIS target is deactivated.
Note
This operation is only available for an activated target.
Refer to "1.9 Definitions of AIS Target Symbols" about the sleeping target.
A-32
FuBl Mil-Ul.
SUBI menu opens.
FRPA/AIS
ARPfuAIS menu opens.
Frs sErri[d.
AIS SETTING menu opens.