Menu Operations - Panasonic AK-UB300G Operating Instructions Manual

Item
[MASTER BLACK GAMMA]
[R BLACK GAMMA]
[B BLACK GAMMA]
[KNEE]
The setting becomes disabled and cannot be set in the following cases.
f When [GAMMA/BLACK GAMMA] → [GAMMA MODE SELECT] is set to [FILE REC]/[VIDEO REC]
f When [MAIN MENU] → [PAINT] → [DRS] → [DRS] is set to [ON]
Item
[KNEE] —
[KNEE MASTER POINT] Sets the knee point position.
[KNEE R POINT]
[KNEE B POINT]
[KNEE MASTER
SLOPE]
[KNEE R SLOPE]
[KNEE B SLOPE]
[AUTO KNEE POINT]
[AUTO KNEE LEVEL]
[AUTO KNEE
RESPONSE]
[WHITE CLIP]
Item
[WHITE CLIP]
[MASTER WHITE CLIP LEVEL]
[R WHITE CLIP LEVEL]
[B WHITE CLIP LEVEL]
[HI-COLOR]
[HI-COLOR LEVEL]
Chapter 4 Menu Operations — Menu list
Adjusts the gamma characteristic adjacent to black.
[−32] - [+32]
f Factory setting: [0]
Adjusts the gamma characteristic of red adjacent to black to the master gamma.
[−20] - [+20]
f Factory setting: [0]
Adjusts the gamma characteristic of blue adjacent to black to the master gamma.
[−20] - [+20]
f Factory setting: [0]
Enables/disables the knee function.
[OFF], [MANUAL], [AUTO]
f Factory setting: [MANUAL]
[080.00%] - [110.00%] (0.25% step)
f Factory setting: [95.00%]
Adjusts the knee point of red to [KNEE MASTER POINT].
[−25.00%] - [25.00%] (0.25% steps)
f Factory setting: [0.00%]
Adjusts the knee point of blue to [KNEE MASTER POINT].
[−25.00%] - [25.00%] (0.25% steps)
f Factory setting: [0.00%]
Sets the knee slope.
[00] - [199]
f Factory setting: [130]
Adjusts the knee slope of red to [KNEE MASTER SLOPE].
[−99] - [+99]
f Factory setting: [0]
Adjusts the knee slope of blue to [KNEE MASTER SLOPE].
[−99] - [+99]
f Factory setting: [0]
Sets the break position of the auto knee.
[080.00%] - [107.00%]
f Factory setting: [95%]
Sets the maximum level of the auto knee.
[100%] - [109%]
f Factory setting: [108%]
Sets the response speed of the auto knee. The smaller the setting value, the faster the response speed.
[1] - [8]
f Factory setting: [4]
Enables/disables the white clip function.
[OFF], [ON]
f Factory setting: [ON]
Sets the white clip level.
[80%] - [109%]
f Factory setting: [109%]
Adjusts red to [MASTER WHITE CLIP LEVEL].
[−15%] - [+15%]
f Factory setting: [0%]
Adjusts blue to [MASTER WHITE CLIP LEVEL].
[−15%] - [+15%]
f Factory setting: [0%]
Sets whether to improve the color reproduction in high-luminance areas.
[OFF], [ON]
f Factory setting: [OFF]
Sets the level of the mode that expands the color dynamic range.
[1] - [32]
f Factory setting: [32]
– 52 –
Description of settings
Description of settings
Description of settings