[Live] Screen (Multi Display Mode); [Multi-Screen] Button - Panasonic AK-UB300G Operating Instructions Manual

[Live] screen (multi display mode)

Confirms images from multiple cameras in a single screen (multi-screen).
Up to four or 16 camera images can be confirmed at once.
[Live] screen of corresponding camera in single display mode is displayed in a separate window by clicking the camera title in each image.
To use the multi-screen, it is necessary to set the camera to display in multi-screen in advance.
Maximum of four groups with four cameras in each group (total of 16 cameras) can be registered.

[Multi-screen] button

Selects the display method of the [Live] screen.
1 [Single]
Displays the IP image of the connected camera.
2 [4Split 1/4 Group], [4Split 2/4 Group], [4Split 3/4 Group], [4Split 4/4 Group], [16Split]
Multiple IP images can be displayed in a single screen by setting the cameras to display in multi-screen with multi-screen setting screen
[Multi-screen setup] in advance. (Multi display mode)
NOTE
@
t The IP image displayed in the multi-screen is only JPEG.
t The image in multi-screen will be stretched vertically to match the display frame with aspect ratio of 4:3.
t It is not possible to transfer from the [Live] screen to the multi-screen in the following cases.
- When the power of this unit is turned off while displaying the IP image
- When the network cable is disconnected
t The IP image display border is not displayed in red even if a tally signal (R tally) is input to the unit in the multi-screen.
Chapter 6 Web Screen — [Live] screen (multi display mode)
4 cameras
– 77 –
16 cameras