Panasonic AK-UB300G Operating Instructions Manual page 55

Item
[ZEBRA EFFECT
MEMORY]
[SKIN TONE EFFECT MEMORY]
[SKIN TONE CRISP]
[I CENTER]
[I WIDTH]
[Q WIDTH]
[Q PHASE]
[LINEAR MATRIX]
Item
[MATRIX]
[LINEAR MATRIX] —
[LINEAR TABLE]
[COLOR CORRECT] —
[COLOR CORRECT
TABLE]
[MATRIX (R-G)_N]
[MATRIX (R-G)_P]
[MATRIX (R-B)_N]
[MATRIX (R-B)_P]
[MATRIX (G-R)_N]
[MATRIX (G-R)_P]
[MATRIX (G-B)_N]
[MATRIX (G-B)_P]
Chapter 4 Menu Operations — Menu list
Selects the table of the zebra display.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Selects the skin tone table used to apply the skin tone detail.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Adjusts the skin tone detail.
[−63] - [+63]
f Factory setting: [+63]
Sets the center position on the I axis (the area where the skin tone effect is applied).
[0] - [255]
f Factory setting: [87] (UHD mode/UHD CROP mode), [18] (HD mode)
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the
center.
[0] - [255]
f Factory setting: [20] (UHD mode/UHD CROP mode), [8] (HD mode)
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the
center.
[0] - [255]
f Factory setting: [43]
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.
[0] - [359]
f Factory setting: [90]
Enables/disables the matrix function.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables the linear matrix function.
[OFF], [ON]
f Factory setting: [OFF]
Selects the table for linear matrix.
[A], [B]
f Factory setting: [A]
Enables/disables the 12-axis color correction function.
[OFF], [ON]
f Factory setting: [OFF]
Selects the table for color correction.
[A], [B]
f Factory setting: [A]
Adjusts the linear matrix between red and green.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between red and green.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between red and blue.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between red and blue.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between green and red.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between green and red.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between green and blue.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
Adjusts the linear matrix between green and blue.
This item is not available when [MATRIX] is set to [OFF].
[−31] - [+31]
f Factory setting: [0]
– 55 –
Description of settings
Description of settings