Connection Setting Screen; Firmware Update Function Screen - Panasonic AK-UB300G Operating Instructions Manual

Connection setting screen

This is the screen displayed when the [Connection Setting] button is clicked. This is also displayed during startup.
1 [Camera]
f [IP Address]
Sets the IP address of AK-UB300G to be connected.
f [Port]
Sets the port number of AK-UB300G to be connected.
This setting is not necessary when the HTTP port number at the AK-UB300G side is not changed from its default.
2 [Authentication]
f [User Name]
Specifies the account name used to connect to AK-UB300G. Specify the account with the administrator privilege.
f [Password]
Specifies the password for the account to be used when connecting.
3 [Local Host]
f [Port]
Specifies the communication port number of the personal computer where the UB300 Setting Tool is to operate.
4 [Connect] button
Connection to AK-UB300G will start when the [Connect] button is clicked after setting [IP Address]/[Port]/[User Name]/[Password].
[AK-UB300] is displayed in [Model] when the connection is successful.

Firmware update function screen

This is the screen displayed when the [Firmware Update] button is clicked.
1 [Camera Information]
Displays the version of the firmware for the connected AK-UB300G.
Version information is displayed in [Option] only when an optional board is added to AK-UB300G.
Chapter 7 UB300 Setting Tool — Operation
– 95 –
1
2
3
4
1
2
3
4