Menu Operations - Panasonic AK-UB300G Operating Instructions Manual

[IRIS]
Item
[WINDOW SELECT]
[IRIS LEVEL]
[PEAK RATIO]
[IRIS RANGE]
[IRIS SPEED]
[IRIS GAIN]
[LENS EXT COMP SW]
[LENS EXT COMP LEVEL]
[IRIS OFFSET SW]
[IRIS OFFSET]
[FBC SETTING]
It is displayed as [---] in the UHD mode/UHD CROP mode.
Item
[FBC]
[W/B BAL SETTING]
Item
[AWB SET]
[ABB SET]
[SHUTTER SPEED]
Item
[SHUTTER SW]
[SHUTTER MODE]
Chapter 4 Menu Operations — Menu list
Sets the photometric range.
[1] - [4]
The image of window will be as follows.
[1]
f Factory setting: [1]
Adjusts the target value (brightness) of the auto iris.
[0] - [100]
f Factory setting: [50]
Sets the ratio of the peak value and average value of auto iris photometry.
[0] - [100]
f Factory setting: [50]
Sets the fine adjustment range of the auto iris level by ROP.
[NORMAL], [(3/4)], [(2/4)], [(1/4)]
f Factory setting: [NORMAL]
Sets the auto iris speed.
[1] - [25]
f Factory setting: [15]
Switches whether to adjust auto iris photometry speed adjustment with the iris gain volume of the lens or
from the menu. Normally, set this to [LENS] and make adjustments with the iris volume of the lens.
[LENS], [CAM]
f Factory setting: [LENS]
Sets the iris compensation when the lens extender is enabled.
[OFF], [ON]
f Factory setting: [OFF]
Sets the iris compensation value when the lens extender is enabled.
[−100] - [+100]
f Factory setting: [0]
Enables/disables the compensation against the iris control value.
[OFF], [ON]
f Factory setting: [OFF]
Compensates the iris control value from the camera.
[−100] - [+100]
f Factory setting: [0]
Enables/disables the flash band compensation.
[OFF], [ON]
f Factory setting: [OFF]
Executes the automatic white balance.
[NO], [YES]
Executes the automatic black balance.
[NO], [YES]
Enables/disables the shutter function.
[OFF]: Disables the shutter.
[ON]: Enables the shutter speed with [SHUTTER SPEED]/[SYNCHRO SCAN].
f Factory setting: [OFF]
Selects the operation mode of the shutter.
[SHUTTER]: Sets the shutter speed to that configured for [SHUTTER SPEED].
[SYNCHRO]: Sets the shutter speed to that configured for [SYNCHRO SCAN].
f Factory setting: [SHUTTER]
– 47 –
Description of settings
[2] [3]
Description of settings
Description of settings
Description of settings
[4]