[Basic] Screen; [Image] Screen - Panasonic AK-UB300G Operating Instructions Manual

7 [Maintenance] button
Clicking this button displays the [Maintenance] screen in the main area. (page 87)

[Basic] screen

Item
[Camera title]
[Automatic installation of viewer software]
[Smoother live video display on the browser
(buffering)]

[Image] screen

You can configure the settings for JPEG images, H.264 images, and image quality.
r [Initial display settings for "Live" page]
Configures initial settings for display on the [Live] screen.
Chapter 6 Web Screen — [Setup] screen
Enter the name of the camera.
Clicking the [Set] button displays the entered name on the camera title display area.
The factory setting value is the product number of the camera.
You can enter 0 to 20 single-byte characters.
Characters that can be used
f Single-byte numbers:
0123456789
f Single-byte alphabet (upper/lower case):
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
f Single-byte symbols:
!#$%'()*+,-./:;<=>?@[]^_`{|}~\
Configures automatic installation of the plugin software for display.
[On]: Installs the plugin software for display automatically.
[Off]: Does not install the plugin software for display automatically.
f Factory setting: [On]
Configures settings for display of images on the camera using the plugin software for display.
[On]: Stores images on the camera to the computer temporarily to make images to be displayed smoother.
[Off]: Does not store images on the camera to the computer and displays images in real time.
Image display and audio playback are not available on a computer where the plugin software for display
Network Camera View 4S is not installed.
The number of times that the plugin software for display has been installed can be viewed in the [Product
info.] tab of the [Maintenance] menu in the [Setup] screen.
f Factory setting: [On]
– 79 –
Description of settings