Windshield Wiper/Wash (If Equipped); Instrument Cluster - Mahindra THAR CRDe 2015 Owner's Manual

FEATURES AND CONTROL

7.7 Windshield Wiper/Wash (if equipped)

A
B
C
D
E
Mist Wipe
A
Wiper OFF
B
Intermittent Wipe
C
Move the wiper stalk towards the steering wheel from any position to activate wash
function (if equipped). The wiper operates simultaneously as long as the wash
function is active.
The wipe/wash function can be activated only when the ignition is in "ON"
position. If you switch off the ignition before switching off the wiper, the blades
stop at random on the windscreen. When the ignition is switched on again, the
wiper blades return to the resting position provided the wipe/wash stalk is in
OFF position.
7-8
U52H17
Low Speed Wipe
D
Hi Speed Wipe
E
Do not operate the wipers when the windshield is dry. It may lead to scratches
on the glass. It is recommended not to use the wiper when the windshield glass
is covered with debris, snow or leaves. Clean the glass before using the wiper to
avoid damage to the wiper blades and glass. Do not operate the windshield
washer for more than 10 seconds or when the reservoir is empty

7.8 Instrument Cluster

The digital instrument cluster comprises of the fuel gauge, speedometer, odometer,
mode selection & reset buttons and coolant temperature gauge.
A B
F
C
E D
U52D01
© Copyright Mahindra & Mahindra Ltd.042015