Rapid Cabin Heating; Front Windshield Defogging/De-Misting - Mahindra XUV 500 Owner's Manual

Set air intake control to fresh air mode
5.
Turn the air conditioner ON
6.
Set the temperature control dial to extreme left (coolest)
7.
position
For faster cabin cooling you can select re-circulated air intake mode
initially. Once passenger compartment reaches a comfortable
temperature, shift to fresh air mode. Also blower speed and
temperature control knob can be re-adjusted as desired.
If your vehicle was parked in the hot sun with all the windows
closed, drive the vehicle with windows open for the first few
minutes. This will help in venting the hot interior air out and
allow the air conditioner to cool the cabin quickly.

10.13 Rapid Cabin Heating

For rapid heating of the cabin, the following AC settings are
recommended:
Make sure that all the windows are fully closed
1.
Set the blower to maximum speed
2.
Set the air distribution control to foot mode
3.
Set air intake control to fresh air mode
4.
Set the temperature control dial to extreme right (hot)
5.
position
© Copyright Mahindra and Mahindra Ltd. 052016
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
For de-humidified heating, switch the air conditioner ON
6.
For faster cabin heating you can select re-circulated air intake
mode initially. Once passenger
comfortable temperature, blower speed and temperature control
knob can be re-adjusted as desired.
In extreme cold weather conditions, the engine coolant takes
time to get heated up. Hence it might take a while for hot air
discharge, even when blower is running and temperature
control dial is set to hot position.

10.14 Front Windshield Defogging/De-misting

Front windshield glass defogger switch is located on the blower
speed control dial in the central switch bank. Press the switch once
compartment reaches a
10-15