Windshield Wiper/Wash (If Equipped); Instrument Cluster - Mahindra THAR m2DiCR Owner's Manual

FEATURES AND CONTROL
Government of India, Ministry of Environment & Forests, has
decided to issue a notification that horn should not be used at
night time in silence zones and in residential areas except
during a public emergency. All Mahindra vehicle owners are
advised to follow this regulation thereby helping the cause of
reduction of Noise Pollution.

7.7 Windshield Wiper/Wash (if equipped)

A
B
C
D
E
Mist Wipe
A
Wiper OFF
B
Intermittent Wipe
C
7-8
U52H17
Low Speed Wipe
D
Hi Speed Wipe
E
Move the wiper stalk towards the steering wheel from any position
to activate wash function (if equipped). The wiper operates
simultaneously as long as the wash function is active.
The wipe/wash function can be activated only when the ignition
is in "ON" position. If you switch off the ignition before switching
off the wiper, the blades stop at random on the windscreen.
When the ignition is switched on again, the wiper blades return
to the resting position provided the wipe/wash stalk is in OFF
position.
Do not operate the wipers when the windshield is dry. It may
lead to scratches on the glass. It is recommended not to use
the wiper when the windshield glass is covered with debris,
snow or leaves. Clean the glass before using the wiper to avoid
damage to the wiper blades and glass. Do not operate the
windshield washer for more than 10 seconds or when the
reservoir is empty

7.8 Instrument Cluster

The digital instrument cluster comprises of the fuel gauge,
speedometer, odometer, mode selection & reset buttons and
coolant temperature gauge.
© Copyright Mahindra and Mahindra Ltd.062016