Driving Motor - ELNA eXcellence 780 Service Manual

Motor belt
Setscrew
Setscrew
Replacing Electronic Components
200 g pressure
5 mm

Driving motor

To remove:
1. Remove the belt cover, the top cover and the front
cover (see pages 1, 2 and 6).
2. Remove the setscrews (2 pcs) and the motor belt.
Remove the driving motor.
To attach:
1. Attach the driving motor. Tighten the setscrews
temporarily.
2. Adjust the motor belt deflection to about 5 mm by
pressing the middle of the motor belt with your finger
with approximately 200 grams of pressure.
3. Tighten the setscrews securely.
4. Attach the front cover, the top cover and the belt cover.
14