How To Use The Side-Trimmer; Introduction; Turn On The Side-Trimmer; Enter The Job Settings - Watkiss P2T User Manual

How to use the Side-Trimmer

CHAPTER 2

Introduction

This chapter gives information on how to use the Side-Trimmer.
For information on how to operate the booklet maker, refer to the booklet maker
documentation.
Information about the user interface is included in "The User Interface" on
page 7.
Information about standard procedures, for example opening covers to clear a
paper jam, is included in "Standard Tasks" on page 11.

Turn On the Side-Trimmer

Procedure
1. Connect the Side-Trimmer to the mains power supply.
2. Use the mains ON/OFF switch to turn ON the Side-Trimmer.

Enter the Job Settings

Make the settings in the
maker. See "The User Interface" on page 7 for more information.
• The side trim dimension is calculated automatically according to the
SIZE
• To change the size and trim position, touch
page 8.
Watkiss P2T 2-Knife Trimmer User Manual
BASIC
.
window on the touch screen of the booklet
. See "Side-Trim" on
SIDE TRIM
PAGE
5