Watkiss P2T User Manual page 7

1 - Introduction to the Watkiss P2T 2-Knife Trimmer - Description of the Side-Trimmer
The Side-Trimmer
FIGURE 2. Side-Trimmer Components
Component - Function Table
No. Component
1
2
3
4
5
6
7
Watkiss P2T 2-Knife Trimmer User Manual
1
2
3
The Top Cover
The Trim Bin
The Stacker
Communications cable
Voltage label
Mains power input con-
nector
Mains power ON/OFF
switch
Function
The top cover opens to allow error recovery.
The trim bin collects the paper that is trimmed
from the top and bottom of the book.
If the PowerSquare is configured with a Book
Stacker and a P2T Side-Trimmer, the P2T trim bin
is located in the Book Stacker.
The stacker collects the finished books.
The communications cable connects the Side-
Trimmer to the PowerSquare.
The voltage label displays the machine voltage.
The mains power input connector is used to con-
nect the Side-Trimmer to mains electrical power.
The mains power ON/OFF switch turns ON the
Side-Trimmer or turns OFF the Side-Trimmer.
4
5
6
7
8
9
3