Specifications - Watkiss P2T User Manual

7 - Specifications -

Stacker Capacity
Dimensions &
Weight
Power Supply
Power
Consumption
Noise Emission
Approvals
Radio Frequency
Emissions
* Standard book is made from 20 sheets of 80gsm paper, with 2 stitches.
Production may vary according to operating conditions. In line with a policy of
continual product improvement, the manufacturer reserves the right to alter the
materials or specification of this product at any time without notice.
38
Output conveyor: 20 books*
Book Stacker (optional): 930mm
Width: 1142mm (installed)
Depth: 924mm
Height: 885 - 968mm (adjustable)
Weight: 300kg
Side-Trimmer: 220-240V 50/60Hz, single phase
stand-by: 40VA (10W)
in operation: 1200VA (750W) during trimming (1 second of
cycle)
stand-by: ambient
in operation: 65 dB (A), peak 79 dB (A)
Complies with CE and UL. Conforms to FCC rules Part 15
Class A and VCCI Class A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Watkiss P2T 2-Knife Trimmer User Manual