Watkiss P2T User Manual page 32

5 - Error Conditions, Problems and Solutions - Quality Problems
Side-Trimming problem - the book is not trimmed square
Open and then close the top cover of the side-trimmer. Wait for the side-trimmer
to reset. Does the problem continue?
Yes No
Open the top cover of the Side-Trimmer. There will be paper trimmings on the
large black waste conveyor belt - this is normal. Are there paper trimmings or a
book in other places?
No
Is the side-trim dimension more than 190mm?
No
Turn off the Side-Trimmer at the mains ON/OFF switch. Wait for 5 seconds and
then turn on the Side-Trimmer. Does the problem continue?
Yes No
Call your service engineer.
28
Further action is not needed.
Yes
Clear the paper trimmings or book.
Does the problem continue?
Yes No
No further action is needed.
Yes
Are the book supports fitted?
Yes No
Fit the book supports. See "Remove and re-fit the Side-Trimmer Book
Supports" on page 17.
Does the problem continue?
Yes No
No further action is needed.
Further action is not needed.
Watkiss P2T 2-Knife Trimmer User Manual