Watkiss P2T User Manual page 30

5 - Error Conditions, Problems and Solutions - Quality Problems
Side-Trimming problem - the book is not trimmed
Check the user interface.
Is the
No
Is
AUTO
No
Open and then close the top cover of the side-trimmer. Wait for the side-trimmer
to reset. Does the problem continue?
Yes No
Turn off the Side-Trimmer at the mains ON/OFF switch. Wait for 5 seconds and
then turn on the Side-Trimmer. Does the problem continue?
Yes No
Call your service engineer.
26
option turned off?
SIDE TRIM
Yes
Turn on the option.
SIDE TRIM
turned off in the
SIDE TRIM
Yes
Set to .
SIDE TRIM AUTO
Does the problem continue?
Yes No
Further action is not needed.
If you need to use a custom trim size, enter the trim dimension in the
window. Make sure the size is at least 2mm less than the
SIDE TRIM
book size.
Further action is not needed.
Further action is not needed.
window?
Watkiss P2T 2-Knife Trimmer User Manual